What’s the difference between 30 and 50-amp service?
Whether you’re new to RVing or ready to upgrade from a 30-amp to a 50-amp RV, knowing the differences between these RV electrical systems is important. Let’s explore them so you can adequately protect and utilize electricity in your RV.
Understanding Electrical Terminology
Here are a few key definitions that help you understand the different electrical terms utilized in this article, as well as our other content about RV electrical systems:
- Amperes (current): The quantity of electrons that flows through a conductor – aka, the amount of current flow.
- Wattage (watts): A measure of electrical power equal to one ampere under the pressure of one volt.
- Voltage (volts): The electrical pressure or difference felt between two points in a circuit – aka, the force that causes electrons to flow due to a difference of potential.
- Resistance (ohms): Opposition to electrical movement. Less resistance = more electron flow; more resistance = less electron flow.
- Hot Wire: Carries the current from the power source to the outlet.
- Neutral Wire: Carries used electricity from the load back to the power source.
- Ground Wire: A safety measure that provides a lower resistance pathway to ground than the human body, reducing the risk of severity of electrical shock.
What is 30 Amp versus 50 Amp Service?
Having an RV that’s wired for 30 amp or 50 amp service tells you how much current flow your RV is built for. Exceeding that current flow will cause a tripped breaker or blown fuse. 30 amp RVs are built to consume up to 30 amps of current flow, and 50 amp RVs are built to consume up to 50 amps.
The Key Differences: 30 Amp versus 50 Amp
RVs with lower load requirements generally utilize 30 amp service. 50 amp service is more common on larger RVs with higher load requirements, as the plug supplies two separate 50 amp, 120-volt feeds.
For comparison’s sake, most residential homes are built with a 200 amp electrical service. This may be higher based on the size of the home and its load requirements.
Here are the major ways these two RV electrical systems differ:
- The Plugs: 30 amp service requires a three-pronged plug versus 50 amp service requiring a four-pronged plug.
- 30 Amp Plug: a 120-volt hot wire, a neutral, and a ground.
- 50 Amp Plug: two 120-volt hot wires, a neutral and a ground.
- The Maximum Wattage: 30 amp service supplies up to 3,600 watts versus 50 amp service providing up to 12,000 watts.
- The Number of Outlets: 30 amp RVs generally have fewer outlets than 50 amp RVs.
- The Breaker Panel: 30 amp RVs have a single row of breakers. 50 amp RVs have a split breaker panel, allowing heavy amp draw components to be split between the two sides of the panel.
Technician Tip: Note that the main breaker set in a 50 amp coach is not interconnected, so it provides 120-volts AC, not 240-volts AC. However, they share a trip bar so that they trip together and reset together. Should the user exceed 50 amps or 6,000 watts on one side, both sides will trip even if there is little to no load on the other side. The result is less than the anticipated 12,000-watt capacity. Users must be cognizant of how the load center is balanced in order to manage it properly. This balance may be altered by the certified technicians at Camping World to better suit the individual user’s needs.
Average Amp Draw of Key RV Appliances
An important principle to understand when you’re new to RVing is the average amp draw of your large and small RV appliances. In most cases, you should avoid powering on all appliances simultaneously, as this is likely to overload one or more circuits, causing a breaker to trip or fuse to blow.
Here is the average amp draws for your main RV appliances:
- Air Conditioner: ~15 amps
- Electric Heating Element for Water Heater: ~10 amps
- Microwave: ~10 amps
- Refrigerator: ~5 amps
Other appliances that draw amperage include televisions, space heaters, coffee makers, electric fireplaces, hair dryers, onboard converters, and more. Items with heating elements, such as hair dryers, curling irons, coffee makers, and electric skillets, will consume large amounts of power and may require shutting something else off in order to operate them safely.
When you add these amperages, you can see how quickly you approach a 30 amp RV’s electrical threshold. This is why managing your power consumption is so important to avoid overloading a circuit.
30 Amp vs 50 Amp Service and Generator Use
If your RV has an onboard generator, or you’re using a portable generator, do the math to understand how much amperage it’s rated for. When running your RV’s appliances on the generator, you may not be able to consume as much amperage as when connected to a power pedestal.
For example, let’s say your 50 amp RV has a 5,500-watt generator. At 120 volts, that generator supplies up to 45.83 amps (5500 watts / 120 volts = 45.83 amps). This is critical to remember when boondocking or running your generator between campground stays.
30 Amp vs 50 Amp Electrical Adapters
It’s important to know that compatible electrical adapters allow you to plug a 30 amp RV into a 50 amp pedestal and vice versa. There are also adapters for plugging a 30 amp RV into a 120-volt AC receptacle, but there are limitations.
Here are the important takeaways:
- A 30 amp RV won’t receive more than the 3,600 watts it’s designed for, even when using an adapter to connect to a 50 amp plug.
- A 50 amp RV will be limited to 3,600 watts when using an adapter to connect to a 30 amp service.
- A 30 amp RV will be limited to 2,400 watts when using an adapter to connect to a 20 amp 120-volt AC outlet.
- A 30 amp RV will be limited to 1,800 watts when using an adapter to connect to a 15 amp 120-volt AC outlet.
Explore our full selection of electrical adapters to find the right choice for your RV.
30 Amp vs 50 Amp Surge Protectors
Whether your RV has 30 amp or 50 amp service, you’ll need a surge protector designed for that level of service. This device prevents electrical surges from damaging your RV’s electrical system and appliances.
Learn more about RV surge protectors and how to choose the right one for your RV.
Access to reliable electricity is a major reason why tent campers call RVing “glamping.” But there’s much to learn about RV electrical systems when you’re new to them. Here are a few more resources:
- AC vs DC Power Supply and Your RV’s Electrical System
- How to Hook Up Power and Water to Your RV
- Should You Leave Your RV Plugged in All the Time?
Do you have any questions about 30 amp or 50 amp electrical service? Let us know in the comments below.
The post 30 Amp vs 50 Amp: What’s the Difference? appeared first on Camping World Blog.
